LGH Series Centrifugal Chemical Process Pumps

1. The shell is cast as a whole by the vortex chamber, the foot and the inlet and outlet flanges; the inlet is axial and the outlet is radial;

2. The structure of the pump is a rear opening type, and it is not necessary to disassemble the suction and discharge pipes during maintenance;

Ming) is directly driven by an electric motor or an internal combustion engine (diesel engine, gasoline engine);

3. The shaft seal type of the pump is conventionally configured as a mechanical seal for internal circulation flushing and external circulation flushing schemes.

Double end face machine seal type; special requirements can be provided according to the cartridge machine seal configuration;

4. According to the property requirements of the medium, the pump body and the pump cover side can be equipped with a thermal insulation structure, and the temperature requirements of the medium shell can be realized through the external supply of the inlet and outlet pipes;

5. If the particle size of the conveying medium exceeds the requirements, our company can provide an open impeller structure, but the efficiency of the pump will decrease, and the limit working conditions are limited.

Under certain circumstances, it may be necessary to increase the supporting power of the pump;

6. The bearing lubrication methods of the pump include grease lubrication and oil lubrication.