Search Result

All Related Products Other Content

Why Do Self-Priming Pumps Need to be Equipped with Imported Vacuum Pumps? Self-priming pump has the following characteristics:Strong sewage discharge capacity: Special impeller anti-clogging design ensures efficient and non-clogging pumping.Efficient energy saving: Adopting...
Super ST-8 (8inch x 8inch) Self-priming Non-clogging Centrifugal Sewage Pump Compared with other manufacturer models, the ST series is provided as part of a complete pumping kit or as a separate pump assembly, providing industry consistency in the interchangeability of rotating components and pump footprint.
1.5inch x 1inch B Small Gold Mine Rubber Liners Slurry Pump Heavy duty, horizontal, single stage, centrifugal, cantilevered, rubber lined wetted parts design.
Measures to Improve Self-priming Performance and Self-priming Capability of Self-priming Pumps Measures to improve the self-priming performance of self-priming pumpsIncrease the maximum circumferential velocity of the impeller outlet and the width of the impeller blade outlet. The maximum circu...
Installation Considerations for Self-Priming Pumps Before installing the self-priming pump, suitable concrete foundation should be prepared according to the basic size of the self-priming pump, and the anchor bolts should be pre-embedded during the pr...
Super ST-10 (10inch x 10inch) Self-priming Wet Prime Pumps Maintenance can be done quickly and easily because pumps designed to operate at high altitude above water level. We can support several multifunctional wet priming pumps specially designed for dirty water, large solids and transparent liquid applications.
2inch x 1.5inch Polyurethane Erosion Resistant Material Lined Slurry Pump Cast iron or ductile iron housings with external stiffeners contain wear-resistant linings and provide high working pressure capability.
Reasons and Solutions for the Failure of Self-priming Pumps to Draw Water Due to the poor sealing of the suction pipe of the self-priming pump, the self-priming pump has been in a state of emptying air and cannot suck water.Solution: Check the sealing of the inlet pipe of t...
3inch x 2inch C Gold Leaching Cyanide Slurry Pump Shaft seal includes packing seal, impeller seal and mechanical seal; The driving modes include elastic coupling, pulley V-belt, gearbox, VFD, SCR control, etc.
Outdoor Storage Precautions for Centrifugal Pumps If outdoor storage is not handled properly, it may not only pollute and deform the centrifugal pump, but also cause irreparable damage to the components. At the same time, it will bring inconvenience ...
4inch x 3inch C Pulp And Paper Rubber Lined Slurry Pump Characteristics of replaceable wear-resistant metal lining. Different materials such as natural rubber, nitrile rubber and polyurethane can be selected according to the medium conditions. It is an ideal solution for conveying water and solid mixed media, and it is also suitable for conveying fine particles and corrosive liquids containing suspended particles.
Preventive Measures for Avoiding Self-priming Pump Intake Air Self-priming pump relies on the high-speed rotation of the impeller to create a low-pressure zone inside the pump for pumping, so the self-priming centrifugal pump must ensure that its inlet pipe does...
Starting and Stopping of Self-Priming Pump Before starting the self-priming pumps, there are some preparatory checks to be done1. Depending on the working condition of the pump, use high-quality calcium-based grease or No. 10 engine oil for lu...
6inch x 4inch D Copper Ore Chemical Slurry Service Pump Front and rear shielding layers have pumped out blades design reduces recirculation and seal contamination. Elastomer impellers are made of high-strength steel coated with rubber, and impeller inserts or nuts are not required for cast impeller threads.
What Is the Influence of Temperature on the Selection of Centrifugal Pumps? The expected temperature range that needs to be dealt with during the operation of pumps is crucial for making the correct selection, not only involving the type and structural form of centrifugal pum...

«
1 ...
7
8
9
10
11
12
»